HINT: To save time use the pop-up keypad on the touch screen instead of the scroll buttons to insert values. Select the display box for the size selections (the small rectangle to the left of the scroll buttons) and a keypad will be displayed. Enter the values and select Save.

- Custom — used to reduce or enlarge a document in non- equal proportions. Again, 100% and Auto are available to reset the magnification after using a custom setting.

HINT: When Custom Reduce/Enlarge is selected, the machine does not rotate the image to match the orientation of the paper. If Auto Custom Reduce/Enlarge is selected, the machine does rotate the image.

Paper Supply

The media loaded in the paper trays determines the sizes displayed in the Paper Supply selection on the touch screen. For example, if transparencies are loaded, a picture of a transparency is displayed.

When a tray is opened or paper is loaded in to the Bypass Tray, a pop-up window ‘Tray Attributes’ will be displayed on the touch screen. When changing the type or color of stock in the tray, the tray must be programmed to match the media being loaded. If the type or color of stock is not being changed, select Confirm to close the window.

NOTE: For information about loading paper, refer to “Paper and other media” on page 10-1.

Page 3-18

Xerox Document Centre 440/432/430/426/425/420 User Guide

Page 78
Image 78
Xerox 440, 432, 430, 426, 425, 420 manual Paper Supply