character (/) again to turn off Mask Data. The characters or numbers entered between the slash (/) characters are displayed as asterisks (*).

Password Check Switch [S] for remote terminal identification. This character verifies that the correct number has been dialed, which is very important if sending a confidential document. A password is required before transmission to a remote machine. For example, 1234567S4567 (where as 1234567 is the telephone number and 4567 after the S is the password) instructs the machine to check for validity, which is also known as Secure Send. The machine does not dial any number after the S.

Pulse to Tone Switch [:] to switch between pulse and tone dialing.

Begin DTMF [*] start a sequence of DTMF characters.

End DTMF [#] end a sequence of DTMF characters.

Wait for network tone to suspend dialing until an expected network tone is detected. detection [W] Or it can be used to detect a specific tone when accessing an

outside line or other services.

Local ID [+] character check required as part of some international telephone numbers (in

[+]place of 00).

Local ID [space] character to improve readability. For example, adding spaces to a check [ ] telephone number as 1 234 5678 instead of 12345678.

Keypad

The keypad corresponds to the control panel telephone keypad buttons.

Page 4-54

Xerox Document Centre 440/432/430/426/425/420 User Guide

Page 170
Image 170
Xerox 430, 440, 432, 426, 425, 420 manual Keypad