Auto Clear

With the Auto Clear feature enabled, the machine returns to the default settings after the specified time.

¾Select [Auto Clear].

¾Select [On] or [Off].

¾If [On] is selected, use the scroll buttons to set the timeout period.

Low Power

Low Power Mode becomes active after the specified time of machine non-use. When activated, the Touch Screen is blank and the Power Saver light is on. When the Control Panel or Touch Screen is selected, or the Platen cover lifted, the machine responds within 1 second. All features are available within 30 seconds.

¾Select [Low Power].

¾Use the scroll buttons to set the timeout period.

NOTE: If the Low Power timeout is set higher than the timeout for Power Save or Auto Off (depending on system configuration), the machine displays a message that Low Power cannot exceed Power Save (or Auto Off).

Page 11-12

Xerox Document Centre 440/432/430/426/425/420 User Guide

Page 308
Image 308
Xerox 430, 440, 432, 426, 425, 420 manual ¾ Select Auto Clear, ¾ Select Low Power