Transparency options

Off the feature is not available.

Blank Dividers places a blank sheet of paper between each transparency.

No Dividers prints transparencies with no dividers, Copy Sets can still be selected.

Printed Dividers an additional paper copy is automatically inserted after each transparency.

Copy Sets prints additional paper sets of the transparencies. Select Copy Sets and use the number keypad to enter the quantity required.

HINT: If a paper tray has been loaded and the tray attributes have been programmed it is not necessary to assign a tray for transparencies. The DC440/432/430/426/425/420 automatically detects the tray that contains the transparencies.

NOTE: To avoid overheated or distorted transparencies do not copy onto transparencies without selecting Transparencies first.

N Up (2 Up - DC426/420)

DC440/432/430/425 This feature prints two or four independent documents on to one sheet of paper. The DC440/432/430/425 reduces/ enlarges the images as needed to print them either in landscape or portrait orientation on one page based on the paper supply selected.

DC426/420 this feature is available as 2 Up. It enables two independent documents to be printed side by side on to one sheet of paper. It reduces / enlarges the images as needed to display them in landscape orientation on one page.

Page 3-36

Xerox Document Centre 440/432/430/426/425/420 User Guide

Page 96
Image 96
Xerox 440, 432, 430, 425 manual Up 2 Up DC426/420, Transparency options