Xerox M20/M20i manual Changing the Master Code

AdministrationMachine	Changing the Master Code
	1	! Press the [Machine Status] key.
	2	! Using the Navigation Keys select
		[System Admin Tools] and press

[Enter].

!If the System Admin Tools have already been passcode protected, type in the password and press [Enter].

3	! Select [Department] using the
	Navigation Keys and press

[Enter].

!Enter the Master Access Code.

#The first time that you access departments, you will be prompted to enter a master access code then re-enter it to confirm the code.

4	! Select [Change M. Code] and
	press [Enter].

System Admin Tools [Passcode Protect]

System Admin Tools

[Department]

Department

[Change M Code]

Page 9-20 Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide