Xerox M20/M20i manual Unfold the Paper Support, Paper Support Bypass Tray

Paper and Other Media

	Loading the Bypass Tray
1
" Remove any curl	! Lower the Bypass Tray, located
on postcards,	on the right side of the product.
envelopes, and
labels before	! Unfold the Paper Support
loading them into
	extension.
the Bypass Tray.

Paper

Support

Bypass Tray

2	! Prepare a stack of paper or
	envelopes for loading by flexing
	or fanning them back and forth.
	Straighten the edges on a level
	surface.

3

"Hold transparencies by the edges and avoid touching the print side.

4

!Load the print material with the print side facing down and against the right edge of the tray.

!Adjust the paper guide to the width of the stack of print material.

Ensure you have not loaded too much print media. The stack should be under the Max. Fill Line.

Page 4-6 Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide