Xerox M20/M20i manual Paper Supply, Map, Bypass Tray

Paper Supply

"Use to select the paper source.

Status	The Status Map identifies				! Press [Copy].
Map	which paper tray is				! To select a paper tray, press the [Paper Supply]
	selected, when a paper
					key until the required tray is lit on the Status Map.
	tray is empty and when an
	error occurs.				The Status Map identifies which paper tray is
	Document				selected, when a paper tray is empty and when an
	Feeder	Error		Bypass	error occurs. The Status Map has a light for each
	Paper				paper tray.
	Jam				Each time the [Paper Supply] key is pressed, a
					different tray is selected and a green light displays
					to indicate the selected tray. When two tray lights
	Tray 1		Tray 2
					display together, the Auto Tray Switching feature
					is active. This enables the machine to switch to a
					different tray if the current tray runs out of paper.
					If a paper tray is empty, the light will flash and if
					enabled, an error tone will sound.
Bypass	Use to notify the machine				! If the Bypass Tray is selected the Paper Type
	the type of paper loaded				option displays. Use the Navigation Keys to
	in the Bypass Tray.				select the Paper Type being loaded and press
					[Enter].
					If using the Bypass, remember to load the
					required stock.

Copy

Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide Page 3-9