Getting Started

Driver Installation

Before direct printing, direct scanning or using ControlCentre through the Parallel Port or the USB port, you will need to install a driver.

The procedure will install the driver and configure it for the local port.

To install the driver on the workstation.

1

! Insert the Driver CD into the CD drive.

Within a few seconds, the CD should start automatically and present you with the opening

screen. If this does not happen, go to the Start menu, select [Run] and browse to the CD drive. Select [Setup] and click [OK]. Click [OK] to start the installation procedure.

2

3

!Select the language for the installation and select [Continue]. The driver screen is displayed.

!Check the boxes for the drivers required, PostScript, PCL, PC Scan and ControlCentre.

!Select [Continue].

#You can choose to install as many drivers as you require by checking the appropriate boxes.

Page 2-24

Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide

Page 48
Image 48
Xerox M20/M20i manual Driver Installation