Xerox M20/M20i manual Using the Bypass Tray, Paper Supply key until, Status Map

Models: M20/M20i

1 215
Download 215 pages 26.49 Kb
Page 75
Image 75

7

! To select a paper tray, press the

[Paper Supply] key until the

required tray is lit on the Status Map.

Tray 1 and the Bypass Tray are available as standard, Tray 2 is optional.

If two tray lights display together, the Auto Tray Switching feature is

Status Map

Paper and Other Media

Enter

active. When one tray runs out of paper, the machine will switch to the other selected tray.

Paper Supply

Using the Bypass Tray

The Bypass Tray is located on the right side of your machine. It can be closed when not in use, making the product more compact. Use the Bypass Tray to print transparencies, labels, envelopes or postcards in addition to making quick runs of paper types or sizes that are not currently loaded in the paper tray.

Acceptable print media is plain paper with sizes ranging from 98 x 148 mm (3.86 x 5.83 inch), to Legal size (216 x 356 mm / 8.5 x 14 inch) and weighing between 60 g/m2 and 160 g/m2 (16 lb and 43 lb).

The following table summarizes the print media allowed and the maximum stacking height for each paper type.

PAPER TYPE

MAXIMUM STACKING HEIGHT

 

 

 

Plain/Bond/Colored and Pre-

100 sheets or 9 mm (0.35 inch)

printed Paper

 

 

 

 

Envelope

10 envelopes or 9 mm (035 inch)

 

 

 

Transparency

30 sheets or 9 mm (0.35 inch)

 

 

 

Label

10 sheets or 9 mm (0.35 inch)

 

 

 

Cardstock

10 sheets or 9 mm (0.35 inch)

 

 

 

 

 

 

!The height is measured with the stack of sheets laid on a flat surface.

Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide

Page 4-5

Page 75
Image 75
Xerox M20/M20i manual Using the Bypass Tray, Paper Supply key until, Required tray is lit on the Status Map