Tunturi J 660 owner manual Moving and Storage, Technical Data, User Maintenance Menu

Page 11

GB

2.Insure the tether key is properly inserted.

3.Insure the power cord is properly plugged.

4.Insure the treadmill is properly lubricated (see 4.3.

LUBRICATING THE RUNNING DECK).

5.If the error code does not disappear after the above mentioned maintenance actions, please contact your local TUNTURI dealer. Always give the error code and serial number (see the sticker at the back of the frame, below the left-hand side rail).

tEtH The tether key is not properly installed

In spite of continuous quality control, individual defects and malfunctions may occur due to individual components. It is in most cases unnecessary to take the whole treadmill for repair, as it is usually sufficient to replace the defective part.

4.5. USER MAINTENANCE MENU

The total treadmill running time and total distance are automatically saved in the memory of the treadmill. If you wish to check the total values during assembly measures, for example, proceed as follows:

1.Press and hold the STOP key while pressing the SCAN/SELECT key (when meter displays “enter weight” mode). The meter displays the user set up mode.

2.Press and hold the STOP key again while pressing first the SCAN/SELECT key and then the ENTER key.

3.The meter will scan the following functions: software version, total time and total distance.

4.Press ENTER key twice to exit the user maintenance menu.

5. MOVING AND STORAGE

The J 660 is equipped with wheels for easy mobility. Before moving, be sure the power cord is unplugged from the wall and the treadmill. Lift the rear end of the treadmill, then push or pull, rolling the treadmill on the front wheels.

NOTE! The running belt may need to be realigned and centered after moving (see 3.1. ALIGNING THE RUNNING BELT and 3.2. ADJUSTING THE BELT TENSION).

To prevent malfunctioning of the treadmill, store it in a dry place with as little temperature variation as possible, protected against dust. Always unplug the treadmill from the electrical outlet when not in use.

NOTE! If the treadmill is not used for at least three weeks, it must be carefully lubricated per the lubrication instructions!

6. TECHNICAL DATA

Length

150 cm / 60"

Height

125 cm / 49,2"

Width

90 cm / 36"

Weight

71 kg / 156 lbs

Running surface length

135 cm / 54"

Running surface width

44 cm / 17,6"

Speed

1.5 -16 km/h / 1-10 mph

Elevation range

0 - 10 %

Meter

Distance

 

Elevation

 

Pulse (optional)

 

Time

 

Pace

 

Speed

 

Energy consumption

 

LED display

 

5 preprogrammed workouts,

 

1 user programme

Motor

1,5 HP

Drive system

Drive belt

Structural frame

Welded steel, powder coated

Maximum user weight

110 kg

All TUNTURI models are designed to meet the electro- magnetic compatibility directive, EMC and are affixed with the CE conformity marking.

All TUNTURI treadmills meet DIN accuracy and safety norms (DIN 32933-1+3).

Due to our continuous programme of product develop- ment we reserve the right to change specifications without notice.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Electronic Treadmill J Remarks and Warnings Mounting the Handlebars AssemblyPlugging in the Treadmill Connecting the Meter CableInsert Safety Tether KEY Mounting the MeterScan / Select Reset+ and Arrow Keys SET / Adjust WeightBegin Training User SET UP ModeEnter Your Weight Choose Manual or Programme ModeProgrammes Pause FeatureComplete Your Exercise Session Pulse Measurement Programme 5 Weight LossUsing the Polar Heart Rate Transmitter Recording and Saving a User ProgrammeAligning the Running Belt AdjustmentsMaintenance Adjusting the Belt TensionLubricating the Running Deck Cleaning and Inspecting the Running BeltCleaning the Treadmill Error CodesMoving and Storage Technical DataUser Maintenance Menu Vor Beginn eines Trainingsprogrammes einen Arzt konsultieren SicherheitshinweiseMontage DES Handlaufs MontageNetzanschluss BetriebMontage DER Elektronikanzeige Anschliessen DES ElektronikanzeigenkabelsFunktionen UND Anzeigen ElektronikanzeigeTastatur Scan Anzeigenwechsel AnwenderoptionenEinstellung DES Körpergewichtes Training BeginnenVorprogrammierte Trainingsprogramme Training UnterbrechenTraining Beenden Trainingsprogramm Schlankheitsprogramm HerzfrequenzmessungTrainingsprogramm BERGAUF-PROGRAMM Trainingsprogramm KonditionsverbesserungsprogrammDrahtlose Herzfrequenzmessung EinstellungenAusrichten DES Laufbandes Nachspannen DES LaufbandesFehlermeldungen WartungReinigung DES Gerätes Pflege DER LaufplatteGespeicherte Werte Transport UND AufbewahrungTechnische Daten Consultez votre médecin avant de commencer les exercices Quelques Conseils ET AvertissementsAssemblage DE LA Barre DE Soutien AssemblageUtilisation Affichages Unite DES CompteursFonction Scan Reglages PersonnelsEntree DU Poids DE L’UTILISATEUR Votre ExerciceProgrammes MIS EN Memoire Fonction Maintien EN MemoireTerminer Votre Exercice Utilisation D’UN Emetteur Sans FIL Polar Mesure DU PoulsProgramme Amelioration DE LA Forme Programme 5 AmaigrissementReglage DE LA Tension DU Tapis ReglagesReglage DE L’ALIGNEMENT DU Tapis Codes D’ANOMALIES DE Fonctionnement EntretienNettoyage ET Verification DE L’ETAT DU Tapis Nettoyage DE L’APPAREILValeurs Cumulees Transport ET RangementCaracteristiques Techniques Observe Ademas Informacion Y PrecaucionesMontaje DE LOS Manillares MontajePoner LA Llave DE Seguridad Montaje DEL ContadorConexion DEL Cable DEL Contador Conexion DE LA Maquina a LA CorrienteFunciones ContadorModo Manual O Programado Programacion POR EL UsuarioAnote SU Peso Comienzo DEL EjercicioProgramas Funcion DE PausaPara Terminar SU Sesion DE Ejercicio Programa 4 Entrenamiento Cardiovascular Programa 5 Weight Loss Perdida DE PesoGrabar Y Salvar UN Programa DE Usuario Medida DEL PulsoAjuste DE LA Tension DE LA Cinta AjustesMantenimiento Ajuste DE LA Cinta RodanteLubricacion DE LA Base DE LA Cinta Codigos DE ErrorLimpieza E Inspeccion DE LA Cinta Limpieza DE LA MaquinaMenu DE Mantenimiento DEL Usuario Traslado Y AlmacenajeDatos Tecnicos UW Gezondheid Opmerkingen EN AdviezenMontage VAN DE Handrails HET Gebruik VAN DE Noodstop BedieningMontage VAN HET Bedieningspaneel HET Aansluiten VAN DE Looptrainer AAN HET ElektriciteitsnetFuncties BedieningspaneelEigen Keuze EN TRAININGSPROGRAMMA’S VoorkeurinstellingenGewicht Invoeren Beginnen MET DE Training11. Geïnstalleerde TRAININGSPROGRAMMA’S HET Onderbreken VAN DE TrainingHET Beëindigen VAN DE Training Programma 5 Afslanken HET Starten EN Opslaan VAN EEN ProgrammaHartslagmeting Programma 4 IntervaltrainingHET Spannen VAN DE Band HET Afstellen VAN DE BandHET Centreren VAN DE Band Smering OnderhoudReiniging EN Inspectie VAN DE Band HET Reinigen VAN DE LooptrainerCumulatieve Waarden Vervoer EN OpslagTechnische Gegevens Avvertenze Montaggio DEI Corrimano AssemblaggioInserimento Della Chiave DI Sicurezza Montaggio DEL PannelloCollegamento DEL Cavo Inserimento Della Spina Nella PresaFunzioni PannelloScegliere Programmi O Impostazione Manuale Impostazione DEL Peso Enter WeightImpostazione Utente Inizio DI AllenamentoProgrammi Scansione DEI Valori ScanFunzione Pausa Finire L’ALLENAMENTOProgramma 5 Perdita DI Peso Registrazione E Salvataggio DI UN Programma UtenteMisurazione Pulsazioni Programma Allenamento CardiovascolareRegolazione Della Tensione DEL Nastro RegolazioniManutenzione Allineamento DEL NastroCodice Descrizione Codici DI ErrorePulizia DEL Treadmill Procedura PER LA LubrificazioneManutenzione Utente MENU’ Dati TecniciKonsultera din läkare innan du inleder ditt träningsprogram Anmärkningar OCH VarningarMontering AV Handstöd MonteringAnvändning Funktioner J 660 MätareVAL AV Manuell Funktion Eller Förprogrammerat Program AnvändaroptionerInställning AV Vikt Börja Träna11. Förprogrammerade Träningsprogram Avslutning AV Träningspass13.1. Trådlös Pulsmätning Sparande AV Program OCH Start AV Förprogrammerat ProgramPulsmätning Träningsprogram 5 ViktminskningInställningar ServiceFelkod Orsak Smörjning AV LöpbandFelkoder Kumulerade Värden Transport OCH FörvaringTekniska Data FIN Huomautukset JA VaroituksetKäsitukien Asennus AsennusKäyttö Mittari Manuaalitoiminnon TAI Valmisohjelman Valitseminen KäyttäjäasetustoimintoKäyttäjäpainon Asetus Harjoittelun AloittaminenValmiit Ohjelmat Harjoittelun KeskeyttäminenHarjoittelun Lopettaminen Polarin Langattoman SYKE- Lähettimen Käyttö SykkeenmittausOhjelma 4 Yleiskunnon Kohotus -OHJELMA Ohjelma 5 LaihdutusohjelmaMaton Kireyden Säätö SäädötHuolto Maton KeskittäminenVikakoodit Laitteen PuhdistusLaitteen Huoltovoitelu Kumuloituneet Arvot Kuljetus JA SäilytysTekniset Tiedot Page List for recycling / Index für Materialentsorgung Ref. noN T U R I O Y L T D

J 660 specifications

The Tunturi J 660 is a multifaceted piece of fitness equipment that stands out for its innovative design and functionality. Targeted primarily at home fitness enthusiasts, this gym machine serves as a multipurpose solution, combining the benefits of a traditional gym workout with convenience and versatility.

One of the main features of the Tunturi J 660 is its robust construction, which is designed to provide stability and durability during intense workouts. Made from high-quality materials, it ensures that users can exercise safely and effectively, whether they are performing strength training or cardio workouts. The machine is built with ergonomics in mind, featuring comfortable grips and an adjustable seat to accommodate users of varying heights and fitness levels.

A key technological advance incorporated in the Tunturi J 660 is its digital monitoring system. This feature allows users to track their progress in real-time, displaying important metrics such as time spent exercising, calories burned, and heart rate. This data helps users to stay motivated and enable them to set achievable fitness goals.

In addition to its monitoring capabilities, the J 660 offers a range of resistance settings. This allows users to customize their workouts according to their fitness levels and objectives. Whether it is building muscle strength or enhancing cardiovascular endurance, the adjustable resistance feature provides the necessary flexibility to cater to individual workout preferences.

The Tunturi J 660 also integrates various exercise modes, meaning users can engage in different workout routines without the need for multiple machines. From rowing and cycling to strength training exercises, this all-in-one machine accommodates a wide variety of workouts, making it an ideal choice for those with limited space.

Moreover, the compact and sleek design of the J 660 allows it to fit seamlessly into any home environment. Its user-friendly interface ensures that individuals of all ages and fitness levels can navigate through the different settings without confusion.

In conclusion, the Tunturi J 660 is an impressive fitness machine that combines robust construction, innovative technology, and versatility. Its main features make it ideal for home workouts, catering to a wide range of fitness goals while providing users with the comfort and data needed to maintain their health and fitness journey.
Top Page Image Contents