Safety of others
uThis appliance is not intended for use by persons (includ- ing children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concern- ing the use of the appliance by a person responsible for their safety.
uChildren should be supervised to ensure that they do not play with the appliance.
Residual risks.
Additional residual risks may arise when using the tool which may not be included in the enclosed safety warnings. These risks can arise from misuse, prolonged use etc.
Even with the application of the relevant safety regulations and the implementation of safety devices, certain residual risks can not be avoided. These include:
uInjuries caused by touching any moving parts.
uInjuries caused by touching any hot parts.
uInjuries caused when changing any parts or accessories.
uInjuries caused by prolonged use of the appliance. When using any appliance for prolonged periods ensure you take regular breaks.
@Warning! This product must be earthed. Always check that the power supply corre- sponds to the voltage on the rating plate.Electrical safety
Power plugs must match the outlet. Never modify the plug in any way. Unmodified plugs and matching outlets will reduce risk of electric shock.
uIf the supply cord is damaged, it must be replaced by the manufacturer or an authorised Black & Decker Service Centre in order to avoid a hazard.
Extension cables & Class 1 product
uA
uUp to 30m (100 ft) can be used without loss of power.
Labels on the appliance
The following pictograms are shown on the tool:
Warning! To reduce the risk of injury, the user must read the instruction manual.
Warning! Danger of scalding.
(Original instructions) | ENGLISH |
Features
This appliance includes some or all of the following features.
1.ON/Off switch
2.AutoselectTM dial
3.Water tank
4.Handle
5.Steam Head
6.Cleaning pad
7.Resting mat
8.Carpet glider (FSM1600 & FSM1600D only)
9.Jug (FSM1600 & FSM1600D only)
Assembly
Warning! Before attempting any of the following operations, make sure that the appliance is switched off and unplugged and that the appliance is cold and does not contain any water.
Attaching the handle (Fig. A & B)
uSlide the hand grip (10) into the top end of the handle (4) until it clicks into place.
uSlide the bottom end of the handle (4) into the top end of the steam mop body (11) until it clicks into place.
uThe handle can be removed from the Steam mop body for easy storage by pressing the handle tube release button
(12)and pulling the handle (4) out of the steam mop body
Attaching the steam head (Fig. C)
uSlide the bottom end of the steam mop body (11) onto the steam head (5) until it clicks into place.
uThe steam head can be removed from the Steam mop body by pressing the steam head release button (13) and pulling the steam mop body (11) off the steam head (5).
Attaching a cleaning pad (Fig. D)
Replacement cleaning pads are available from your Black & Decker dealer (cat. no.
uPlace a cleaning pad (6) on the floor with the ‘hook & loop’ side facing up.
uLightly press the steam mop down onto the cleaning pad
(6).
Caution! Always place your steam mop on the resting mat (7) with the handle (4) in the upright position when stationary and make sure the steam mop is turned off when not in use.
Removing a cleaning pad (Fig. E)
Caution! Always wear suitable shoes when changing the cleaning pad on your steam mop. Do not wear slippers or open toed footwear.
uReturn the handle (4) to the upright position and turn the steam mop ‘OFF’.
5