GENERAL INFORMATION - TECHNICAL DATA
19
1 GENERAL INFORMATION
The coffee machine is suitable to make espresso coffee using coffee beans and is equipped with a device for the distribution of steam and hot water.
The machine has been designed for domestic use and is not suitable for a heavy or professional use.
Warning. No liability is assumed for any damage caused by:
•incorrect use not in accordance with the intended uses;
•repairs not carried out by Authorized Service Centres;
•tampering with the power cable;
•tampering with any part of the machine;
•the use of
accessories.
In these cases, the warranty is not valid.
1.1 To facilitate reading
A warning triangle draws the attention to all the instructions that are important for the user’s safety.
Please carefully follow these instructions to avoid serious injury!
(Fig. 2) - Reference to figures, parts of the machine and controls is indicated by numbers or letters, like the reference to figure 2 in this section.
This symbol is used to highlight the information that is particularly important for ensuring an
optimal use of the machine.
Figures corresponding to the text may be found on the inside cover.
Keep this page open while reading the instructions.
1.2How to use these operating instructions
Keep these operating instructions in a safe place and make them available to anyone else who would use the coffee machine.
For further information or in case of problems that are not included or not completely explained in these instructions, please contact the Authorized Service Centres.
2 TECHNICAL DATA
• Nominal voltage
See label on the appliance
• Power rating
See label on the appliance
• Power supply
See label on the appliance
• Shell material
Thermoplastic
• Size (mm)
355 x 385 x 337
• Weight (kg)
8,5
• Cable length (mm)
1200
• Control panel
Front
• Water tank
1,7 (l) - Removable
•Coffee bean hopper capacity (g) 350 g of coffee beans
•Pump pressure (bar)
15
• Boiler
Stainless steel
• Safety devices
Boiler pressure safety valve;
safety thermostat.
Subject to engineering and manufacturing changes due to technological developments.
The machine conforms to the European Directive 89/336/EEC (Italian Legislative Decree 476 dated 04/12/92) concerning electromagnetic compatibility.