3Com CS/2500 manual Install brackets

Mounting the Server 2-3

2Slip two spring-clip captive nuts over the holes of each rack pole where you want to install the server (see Figure 2-1).

Make sure that the nut goes behind the pole.

3Attach the server to the rack.

One person should hold the server between the poles of the rack, while the other attaches the server to the poles. Attach the server to the rack with the four #10-32 panhead screws using the #2 Phillips screwdriver, as shown in Figure 2-1. Tighten each screw securely.

brackets

CS/2600

3Com

4/40 screws

Install brackets

CS/2600

3Com

Install server in rack

Figure 2-1 Mounting in a Rack