ADTRAN 619510003-1A manual Select the telephone icon

Enterprise Communications Server Using Standard Elements

You do not need to specify the mailbox from which messages are sent. Your system administrator does this, so that messages for your extension are stored in your mailbox and delivered from there.To specify phone numbers for the Deliver Messages element

Deliver Messages element

1.Select the telephone icon.

2.In the Enter Phone Number dialog box, type a phone number in the Telephone number box.

You can also enter a phone number by right-clicking inside the Call box and selecting New.

3.If you want to specify an account code, enable the Use account code check box and type an account code in the box.

4.Select OK. The target number appears in the Call Number(s) list. The UC server calls the target number when it attempts to deliver messages.

5.Repeat steps 1 to 3 to add more target numbers to the list. The UC server calls each number in the list, according to the order you specify, until the call is answered.

Refer to Selecting values within elements using the value selector on page 108 to select a dynamic value for the element.

To change the sequence of target phone numbers listed for Deliver Messages

1.Select the number whose ranking you want to change.

2.Select an arrow to move the number up or down in the list.

Up and down arrows

619510003-1A Copyright © 2009 ADTRAN, Inc. 119