106

 

AT-TQ2403 - Management Software - User's Guide

 

 

 

 

 

 

 

 

 

Field

Description

 

 

Broadcast SSID

Select the Broadcast SSID setting by selecting the Broadcast SSID

 

 

 

checkbox.

 

 

 

By default, the access point broadcasts (allows) the Service Set Identifier

 

 

 

(SSID) in its beacon frames.

 

 

 

You can suppress (prohibit) this broadcast to discourage stations from

 

 

 

automatically discovering your access point. When the AP’s broadcast

 

 

 

SSID is suppressed, the network name will not be displayed in the List of

 

 

 

Available Networks on a client station. Instead, the client must have the

 

 

 

exact network name configured in the supplicant before it will be able to

 

 

 

connect.

 

 

 

Note: The Broadcast SSID you set here is specifically for this Virtual

 

 

 

Network (One or Two). Other networks continue to use the security

 

 

 

modes already configured:

 

 

 

∙ Your original Internal network (configured on Ethernet (Wired)

 

 

 

 

tab) uses the Broadcast SSID set on Security.

 

 

 

∙ If a Guest network is configured, the Broadcast SSID is always

 

 

 

 

allowed.

 

 

 

 

 

 

Security Mode

Select the Security Mode for this VLAN. Select one of the following:

 

 

 

∙ None (Plain-text)

 

 

 

∙

Static WEP

 

 

 

∙

IEEE802.1x

 

 

 

∙

WPA Personal

 

 

 

∙

WPA Enterprise

 

 

 

Note: The Security mode you set here is specifically for this Virtual

 

 

 

Network. Other networks continue to use the security modes already

 

 

 

configured:

 

 

 

∙ Your original Internal network (configured on Ethernet Settings page)

 

 

 

 

uses the Security mode set on Security.

 

 

 

∙ If a Guest network is configured, always set the security mode to

 

 

 

 

"None".

 

 

 

 

 

 

Updating Settings

To update VLAN settings:

1.Navigate to the VWN tab page.

2.Configure the VWN settings as required.

3.Click the Update button to apply the changes.