262

AT-TQ2403 - Management Software - User's Guide

 

 

Set Transmission Opportunity Limit (txop-limit) for WMM client stations

The Transmission Opportunity Limit (txop-limit) specifies an interval of time (in milliseconds) when a WMM client station has the right to initiate transmissions on the wireless network. The txop-limit applies only to the client stations (station-to-AP traffic).

To set the txop-limit on station-to-AP traffic:

set wme-queue wlan0 with queue Queue_Name to txop-limit txop-limit_Value

Where Queue_Name is the queue on the station to which you want the setting to apply and txop- limit_Value is the value you want to specify for the txop-limit.

For example, this command sets the txop-limit on the station Voice queue (vo) to 49.

AT-TQ2403# set wme-queue wlan0 with queue vo to txop-limit 49

View the results of this configuration update (bold in the command output highlights the modified value):

AT-TQ2403# get wme-queue

name

queue aifs

cwmin cwmax txop-limit

---------------------------------------------------------------------------

wlan1

vo

2

3

7

47

wlan1

vi

2

7

15

94

wlan1

be

3

15

1023

0

wlan1

bk

7

15

1023

0

wlan0

vo

14

3

7

49

wlan0

vi

2

7

15

94

wlan0

be

3

15

1023

0

wlan0

bk

7

15

1023

0

Wireless Distribution System (WDS)

Note: Before configuring this feature, make sure you are familiar with the names of the interfaces as described in “Understanding Interfaces as Presented in the CLI”. The interface name you reference in a command determines whether a setting applies to a wired or wireless interface, the Internal or Guest network, or (on a dual-radio AP) to radio "one" or radio "two".

This table shows a quick view of WDS commands and links to detailed examples.

Feature or Setting

CLI Command

Getting Details on a WDS Configuration

get interface wlan0wds0 detail

 

 

Configuring a WDS Link

To set up a Wireless Distribution System (WDS) link between two wireless networks:

1.Enable the WDS interface (wlan0wds0) on the current access point:

AT-TQ2403# set interface wlan0wds0 status up

AT-TQ2403# set interface wlan0wds0 radio wlan0

2.Provide the MAC address of the remote access point to which you want to link: