230 | AT-TQ2403 - Management Software - User's Guide |
| |
wpa-cipher-ccmp off
wpa-allowedon
wpa2-allowedon
rsn-preauthentication off
Set the Broadcast SSID (Allow or Prohibit)
To set the Broadcast SSID to on (allow):
AT-TQ2403# set bss wlan0bssInternal ignore-broadcast-ssid on
To set the Broadcast SSID to off (prohibit):
AT-TQ2403# set bss wlan0bssInternal ignore-broadcast-ssid off
Enable / Disable Station Isolation
AT-TQ2403# get interface br0 port-isolation off
AT-TQ2403# set radio wlan0 station-isolation off
AT-TQ2403# get radio wlan0 detail | |
Property | Value |
------------------------------------------------------------------------------------------ |
status | up |
description | Radio 1 - IEEE 802.11a |
mac | 00:01:02:03:02:00 |
max-bss | 16 |
channel-policy | static |
mode | a |
dot11h | on |
radar-detection | on |
block-time | 30 |
quiet-duration | 0 |
quiet-period | 0 |
tx-mitigation | 3 |
static-channel | 36 |
channel | 36 |
tx-power | 100 |
tx-rx-status | up |
beacon-interval | 100 |
rts-threshold | 2347 |
fragmentation-threshold | 2346 |
super-ag | no |
atheros-xr | no |
load-balance-disassociation-utilization | 0 |
load-balance-disassociation-stations | 0 |
load-balance-no-association-utilization | 0 |
ap-detection | off |
station-isolation | off |
frequency | 5180 |
wme | off |
rate-limit-enable | off |
rate-limit | 50 |
rate-limit-burst | 75 |
Set Security to Plain Text
AT-TQ2403# set interface wlan0 security plain-text