AT-TQ2403 Management Software User's Guide

149

 

 

Figure 57: Configuration Setting Page

2.Click the Reboot button. The AP will reboot.

Upgrading the Firmware

As new versions of the AT-TQ2403 Management Software firmware become available, you can upgrade the firmware on your devices to take advantages of new features and enhancements.

Caution:

It is strongly recommended that do not upgrade the firmware from a wireless client that is associated with the access point you are upgrading. Doing so will possibly cause the upgrade to fail. Furthermore, all wireless clients will be disassociated and no new associations will be allowed.

To upgrade, please use a wired client to gain access to the access point:

∙Create a wired Ethernet connection from a PC to the access point.

∙Bring up the Administration UI

Repeat the upgrade process using with the wired client.

For firmware downgrades, the AP is set back to the factory defaults. To guard against losing a configuration because of a firmware downgrade, you should first save backups of current configurations per the instructions in “Saving the Current Configuration to a Backup File”.

To upgrade the firmware on a particular access point:

1.Navigate to Maintenance > Upgrade on the Administration Web pages for that access point.