218 | AT-TQ2403 - Management Software - User's Guide |
| |
Note: For more information on DHCP and Static IP connection types, see the topic “Understanding Dynamic and Static IP Addressing on the AT-TQ2403 Management Software”.
To get the connection type:
AT-TQ2403# get management dhcp-status up
In order to re-set the connection type from DHCP to Static IP, you must have a serial port connection to the AP because you will lose connectivity during the process of assigning a new static IP address.
To reset the connection type from DHCP to Static IP:
1.Disable DHCP:
AT-TQ2403# set management dhcp-status down
2.Assign a static IP address:
AT-TQ2403# set management static-ip 10.10.12.221
3.Add a route to the default gateway:
set static-ip-route gateway IPAddressOfDefaultGateway For example:
AT-TQ2403# set static-ip-route gateway 10.10.12.1
To reset the connection type from Static IP to DHCP:
AT-TQ2403# set management dhcp-status up
To view the new settings: | |
AT-TQ2403# get management | |
Property | Value |
--------------------------------------------------------------- |
vlan-id | |
interface | br0 |
static-ip | 192.168.1.230 |
static-mask | 255.255.255.0 |
ip | 192.168.199.54 |
mask | 255.255.255.0 |
mac | 00:01:02:03:02:00 |
dhcp-status | up |
management-ip-enabled | 0 |
management-ip-address | 192.168.1.1 |
deny-wlan-management-enabled | 0 |
deny-wlan-management-ping | 0 |
deny-wlan-management-telnet | 0 |
deny-wlan-management-http | 0 |
deny-wlan-management-snmp | 0 |
deny-wlan-management-tftp | 0 |
