210

AT-TQ2403 - Management Software - User's Guide

 

 

Get the Network Name (SSID) for the Wireless Internal Interface

The following example shows how to get the SSID of a Wireless Internal Interface. You can see from the value that is returned, that the SSID of this AP is "allied ".

AT-TQ2403# get interface wlan0 ssid allied

Get current Wireless (Radio) Settings

The following examples show how to use the CLI to get wireless radio settings on an access point, such as mode, channel, and so on. You can see by the output results of the commands that the AP mode is set to IEEE 802.11g, the channel is set to 6, the beacon interval is 100, and so forth.

For information on how to configure Radio settings through the CLI, see “Radio Settings”.

(Radio settings are fully described in the Web UI topic on “Configuring Radio Settings”.)

Get the Current IEEE 802.11 Radio Mode

AT-TQ2403# get radio wlan0 mode a

Get the Channel the AP is Currently Using

AT-TQ2403# get radio wlan0 channel 36

Get Common Radio Settings for the First Radio

AT-TQ2403# get radio wlan0

Property

Value

---------------------------------

status

up

mac

00:01:02:03:02:00

channel-policy

static

mode

a

static-channel

36

channel

36

tx-rx-status

up

Get All Radio Settings on the First Radio

AT-TQ2403# get radio wlan0 detail

 

Property

Value

---------------------------------------------------------------------------------

status

up

description

Radio 1 - IEEE 802.11a

mac

00:01:02:03:02:00

max-bss

16

channel-policy

static

mode

a

dot11h

on

radar-detection

on

block-time

30

quiet-duration

0

quiet-period

0

tx-mitigation

3