AT-TQ2403 Management Software User's Guide

115

 

 

For the Guest interface, MAC Filtering settings apply to both BSSes.

MAC Filtering settings apply to both radios.

Note: Only 1024 MAC addresses are allowed.

Field

Description

Filter

To set the MAC Address Filter, click one of the following radio buttons:

 

∙ Allow only stations in the list

 

∙ Block all stations in list

 

 

Stations List

To add a MAC Address to Stations List, enter its 48-bit MAC address into the

 

lower text boxes, then click Add.

 

The MAC Address is added to the Stations List.

 

To remove a MAC Address from the Stations List, select its 48-bit MAC address,

 

then click Remove.

 

The stations in the list will either be allowed or prevented from accessing the AP

 

based on how you set the Filter.

 

 

Updating Settings

To update MAC settings:

1.Navigate to the MAC Filtering tab page.

2.Configure the MAC settings as required.

3.Click the Update button to apply the changes.