70

AT-TQ2403 - Management Software - User's Guide

 

 

If you selected IEEE 802.1x Security Mode, provide the following:

 

Figure 28: Security Setting Page – IEEE802.1x Setting Page

 

 

 

Field

 

Description

 

 

 

Use internal radius

You can choose whether to use the built-in authentication server provided with

server

 

the AT-TQ2403 Management Software, or you can use an external radius

 

 

server.

 

 

∙ To use the authentication server provided with the AT-TQ2403

 

 

Management Software, ensure the checkbox beside the Use internal

 

 

radius server field is selected. If this option is selected, you do not have to

 

 

provide the Radius IP and Radius Key; they are automatically provided. If the

 

 

option for the internal RADIUS server is enabled, configure user accounts on

 

 

the AP via the User Management tab. For more information, see

 

 

“Managing User Accounts”.

 

 

∙ To use an external authentication server, ensure the checkbox beside the

 

 

Use internal radius server field is deselected. If you deselect this

 

 

checkbox you must supply a Radius IP and Radius Key of the server you

 

 

want to use.

 

 

Note: The RADIUS server is identified by its IP address and UDP port numbers

 

 

for the different services it provides. On the current release of the AT-TQ2403

 

 

Management Software, the RADIUS server User Datagram Protocol (UDP)

 

 

ports used by the access point are not configurable. (The AT-TQ2403

 

 

Management Software is hard-coded to use RADIUS server UDP port 1812 for

 

 

authentication and port 1813 for accounting.)