120AT-TQ2403 - Management Software - User's Guide

Using Pre-Config Rogue AP

Field

Description

AP Detection

To set AP Detection, click Enabled.

 

 

Detection Interval

Use the drop-down menu to specify the schedule for AP Detection.

 

A range of intervals is provided, from "15 Minutes" to "4 Weeks". The

 

default is "15 Minutes"

 

 

Access Points List

To add a MAC Address to the Access Point List, enter the 48-bit MAC

 

address into the lower text boxes, then click Add.

 

The MAC Address is added to the Access Point List.

 

To remove a MAC Address from the Access Point List, select the 48-bit

 

MAC address, then click Remove.

 

Only 200 MAC addresses are allowed.

 

 

Updating Settings

To update Rouge AP settings:

1.Navigate to the Pre-Config Rogue AP tab page.

2.Configure the Pre-Config Rogue AP settings as required.

3.Click the Update button to apply the changes.