38

AT-TQ2403 - Management Software - User's Guide

 

 

All clustered access points are shown on the Cluster > Access Points page. To navigate to clustered access points, you can simply click on the IP address for a specific cluster member shown in the list.

Navigating to an AP by Using its IP Address in a URL

You can also link to the Administration Web pages of a specific access point, by entering the IP address for that access point as a URL directly into a Web browser address bar in the following form:

http://IPAddressOfAccessPoint

Where IPAddressOfAccessPoint is the address of the particular access point you want to monitor or configure.

For standalone access points, this is the only way to navigate to their configuration information.

If you do not know the IP address of a standalone access point, use Kick Start to find all access points on the network and you should be able to derive which ones are standalone by comparing Kick Start findings with access points listed on the Cluster > Access Points page. The Access points that Kick Start finds that are not shown on this page are probably standalone access points.