200

AT-TQ2403 - Management Software - User's Guide

 

 

Feature or Setting

 

CLI Command

 

 

 

Get the Firmware Version for

 

get system version

the Access Point

 

 

Get the Location of the

 

get cluster location

Access Point

 

 

 

 

 

Set the Location for an

 

set system location NewLocation

Access Point

 

For example:

 

 

 

 

set system location hallway

 

 

or

 

 

set system location "Vicky’s Office"

 

 

 

Set the Password

 

set system password NewPassword

 

 

For example:

 

 

set system password admin

 

 

 

Get the Wireless Network

 

get interface wlan0 ssid

Name (SSID)

 

 

 

 

 

Set the Wireless Network

 

set interface wlan0 ssid NewSSiD

Name (SSID)

 

For example:

 

 

 

 

set interface wlan0 ssid Vicky

 

 

set interface wlan0 ssid "Vicky’s AP"

 

 

 

Get the IP Address for an Access Point

In the following example, the IP address for the access point is: 192.168.1.230. Use the get command as shown to obtain the IP address for the management interface.

AT-TQ2403# get management ip 192.168.1.230

Get the MAC Address for an Access Point

In the following example, the MAC address for the access point is: 00:a0:c9:8c:c4:7e. Use the get command as shown to obtain the MAC address for the management interface.

AT-TQ2403# get management mac 00:a0:c9:8c:c4:7e

Get Both the IP Address and MAC Address

The following command returns both the IP address and the MAC address for an access point:

AT-TQ2403# get management ip mac

Property Value