22

AT-TQ2403 - Management Software - User's Guide

 

 

2.Insert the AT-TQ2403 Wireless Access Point CD into the CD-ROM drive on your computer. The Kick Start Welcome dialog box is displayed, as shown in Figure 1

Figure 1: Kick Start Welcome Dialog Box

3.Click Next to search for access points

Wait for the search to complete, or until Kick Start has found your new access points, as shown in Figure 2.

Figure 2: Kick Start Search Results Dialog Box

Note: If no access points are found, Kick Start indicates this and presents some troubleshooting information about your LAN and power connections. After you check the hardware power and Ethernet connections, you can click Back to search again for access points.