Allied Telesis AT-TQ2403 manual 173

AT-TQ2403 Management Software User's Guide 173

To use this type of security, you must do the following:

1.Add the AT-TQ2403 Wireless Access Point to the list of RADIUS server clients. (There are some kind of Radius server support EAP-SIM, such as : FreeRadius)

2.Configure the AT-TQ2403 Wireless Access Point to use your RADIUS server (by providing the RADIUS server IP address as part of the "WPA/WPA2 Enterprise [RADIUS]" security mode settings).

3.Configure wireless clients to use WPA security and "EAP-SIM" as described in this section.

4.Connect USB card reader with SIM card to the wireless client PC.

If you configured the AT-TQ2403 Wireless Access Point to use WPA/WPA2 Enterprise (RADIUS) security mode with an external RADIUS server.

Figure 73: Security Setting Page – WPA Enterprise Setting Page

. . . then configure WPA security with certificate authentication on each client in Intel PROSet as follows.