AT-TQ2403 Management Software User's Guide | 263 |
| |
AT-TQ2403# set interface wlan0wds0 remote-mac MAC_Address_Of_Remote_AP For example:
AT-TQ2403# set interface wlan0wds0 remote-mac 00:E0:B8:76:1B:14
Setting Security for a WDS link to WPA-Personal
The WPA (PSK) security setting can only be set on the WDS link if you have set security on both APs to either WPA Personal or WPA Enterprise.
1.Bring up the WLAN0 interface and set its security to WPA-Personal:
AT-TQ2403# set interface wlan0 ssid "myssid"
AT-TQ2403# set interface wlan0 security wpa-personal
AT-TQ2403# set interface wlan0 wpa-personal-key 12345678
2.After setting the security on the access point, you also want to apply security settings to the WDS link:
AT-TQ2403# set interface wlan0wds0 status up remote-mac 00:80:98:78:18:50
AT-TQ2403# set interface wlan0wds0 wds-ssid wds-test
AT-TQ2403# set interface wlan0wds0 wds-wpa-psk-key 12345678
AT-TQ2403# set interface wlan0wds0 wds-security-policy wpa-personal
Getting Details on a WDS Configuration
Verify the configuration of the WDS link you just configured by getting details on the WDS interface:
AT-TQ2403# get interface wlan0wds0 detail
Property | Value |
------------------------------------------------------------------------------------- |
type | wds |
status | up |
description | Wireless Distribution System - Link 1 |
mac | 00:01:02:03:02:00 |
ip | |
mask | |
static-ip | |
static-mask | |
rx-bytes | 0 |
rx-packets | 0 |
rx-errors | 0 |
rx-drop | 0 |
rx-fifo | 0 |
rx-frame | 0 |
rx-compressed | 0 |
rx-multicast | 0 |
tx-bytes | 0 |
tx-packets | 0 |
tx-errors | 0 |
tx-drop | 0 |
tx-fifo | 0 |
tx-colls | 0 |
tx-carrier | 0 |
tx-compressed | 0 |
stp | |
fd | |
hello | |