94 |
| ||
|
|
|
|
|
|
|
|
| Field | Description |
|
|
|
|
|
| Static IP Address | If you chose Static IP as the Connection Type, these fields will be |
|
|
| enabled. |
|
|
| Enter the Static IP Address in the text boxes. |
|
|
|
|
|
| Subnet Mask | Enter the Subnet Mask in the text boxes. You must obtain this |
|
|
| information from your ISP or network administrator. |
|
|
|
|
|
| Default Gateway | Enter the Default Gateway in the text boxes. |
|
|
|
|
|
| DNS Nameservers | The Domain Name Service (DNS) is a system that resolves the descriptive |
|
|
| name (domainname) of a network resource (for example, |
|
|
| www.alliedtelesis.com) to its numeric IP address (for example, |
|
|
| 66.93.138.219). A DNS server is called a Nameserver. |
|
|
| There are usually two Nameservers; a Primary Nameserver and a |
|
|
| Secondary Nameserver. You can choose DNS Settings via DHCP: |
|
|
| ∙ If you choose On, the IP addresses for the DNS servers will be |
|
|
| assigned automatically via DHCP. (This option is only available if you |
|
|
| specified DHCP for the Connection Type). |
|
|
| ∙ If you choose Off, you should assign static IP addresses manually. |
|
|
|
|
|
| DNS Domain | Specifies a local domain name for use as the default domain. |
|
|
| The DNS Domain can be up to 63 characters long. |
|
|
|
|
|
Configuring Guest Interface Ethernet (Wired) Settings
To configure Ethernet (Wired) Settings for the "Guest" interface, fill in the fields as described below.
Field | Description |
MAC | Shows the MAC address for the Guest interface for the Ethernet port on this access |
Address | point. This is a |
|
|
VLAN ID | If you choose to configure Internal and Guest networks by "VLANs", this field will be |
| enabled. (Provide a number between 1 and 4094 for the Guest VLAN.) |
|
|
Subnet | Shows the subnet work address for the Guest interface. For example, 192.168.1.0. |
|
|
Updating Settings
To update Ethernet settings:
1.Navigate to the Ethernet (Wired) Settings page.
2.Configure the Ethernet settings as required.
3.Click the Update button to apply the changes.