88

AT-TQ2403 - Management Software - User's Guide

 

 

Chapter 11: Setting the Ethernet (Wired) Interface

Ethernet (Wired) Settings describe the configuration of your Ethernet local area network (LAN).

Note: The Ethernet Settings, including guest access, are not shared across the cluster. These settings must be configured individually on the Administration pages for each access point. To get to the Administration pages for an access point that is a member of the current cluster, click on its IP Address link on the Cluster > Access Points page of the current AP. For more information about which settings are shared by the cluster and which are not, see “Which Settings are Shared as Part of the Cluster Configuration and Which Are Not?”

The following sections describe how to configure "Wired" address and related settings on the AT-TQ2403 Management Software:

∙Navigating to Ethernet (Wired) Settings

∙Setting the DNS HostName

∙Enabling or Disabling Guest Access

∙Configuring an Internal LAN and a Guest Network

∙Enabling or Disabling Guest Access and Choosing a Virtual Network

∙Enabling or Disabling Virtual Wireless Networks on the AP

∙Enabling or Disabling Standby Power Saving

∙Configuring LAN or Internal Interface Ethernet Settings

∙Configuring Guest Interface Ethernet (Wired) Settings

∙Updating Settings

Navigating to Ethernet (Wired) Settings

To set the wired address for an access point, navigate to the Manage > Ethernet Settings tab, and update the fields as described below.