AT-TQ2403 Management Software User's Guide

255

 

 

AT-TQ2403# remove mac-acl default mac 00:01:02:03:04:04

4. Getting Current MAC Filtering Settings

Get the Type of MAC Filtering List Currently Set (Accept or Deny)

The following command shows which type of MAC filtering list is currently configured:

AT-TQ2403# get bss wlan0bssInternal mac-acl-mode deny-list

Get MAC Filtering List

The following command shows the clients on the MAC filtering list:

AT-TQ2403# get mac-acl

name

mac

--------------------------

default

00:01:02:03:04:05

default

00:01:02:03:04:06

default

00:01:02:03:04:07

default

00:01:02:03:04:08

Load Balancing

Note: Before configuring this feature, make sure you are familiar with the names of the interfaces as described in “Understanding Interfaces as Presented in the CLI”. The interface name you reference in a command determines whether a setting applies to a wired or wireless interface, the Internal or Guest network, or (on a dual-radio AP) to radio "one" or radio "two".

Load balancing parameters affect the distribution of wireless client connections across multiple access points. Using load balancing, you can prevent scenarios where a single access point in your network shows performance degradation because it is handling a disproportionate share of the wireless traffic. (For a detailed conceptual overview of Load Balancing, see “Load Balancing”.)

The AP provides default settings for load balancing.

The following command examples reconfigure some load balancing settings and get details on the configuration:

AT-TQ2403# set radio wlan0 load-balance-disassociation-station 2 AT-TQ2403# get radio wlan0 load-balance-disassociation-station 2

AT-TQ2403# set radio wlan0 load-balance-disassociation-utilization 25 AT-TQ2403# get radio wlan0 load-balance-disassociation-station

25

AT-TQ2403# set radio wlan0 load-balance-no-association-utilization 50 AT-TQ2403# get radio wlan0 load-balance-no-association-utilization 50