140

 

 

AT-TQ2403 - Management Software - User's Guide

 

 

 

 

 

 

 

 

 

 

 

 

 

Category

MIB

 

Level of Support

 

 

Standard IEEE MIB

Bridge-MIB

 

Partial, read-only support including root

 

 

 

 

 

bridge

 

 

 

 

 

We do not implement the optional

 

 

 

 

 

StaticTable.

 

 

 

 

 

- dot1dStatic

 

 

 

 

 

- dot1dPortPair

 

 

 

 

 

The following OIDs are not implemented:

 

 

 

 

 

- dot1dSr (Because TQ2403 does not

 

 

 

 

 

support routing function)

 

 

 

 

 

 

 

 

Standard IETF MIB

RFC1213-MIB(MIB-II)

 

Partial support, read-only

 

 

 

 

 

 

 

Navigating to SNMP Settings

To configure SNMP settings, navigate to Services > SNMP, and update the fields as described below.

Figure 53: SNMP Setting Page

Configuring SNMP Settings

Start/stop control of SNMP agents, community password configuration, access to MIBs, and configuration of SNMP Trap destinations is provided through the AT-TQ2403 Management Software as described below.