150 | |
|
|
Figure 58: Upgrade Page
Information about the current firmware version is displayed and an option to upgrade a new firmware image is provided.
2.If you know the path to the New Firmware Image file, enter it in the New Firmware Image textbox. Otherwise, click the Browse button and locate the firmware image file.
Update
1.Click Update to apply the new firmware image.
Upon clicking Update for the firmware upgrade, a popup confirmation window is displayed that describes the upgrade process.
2.Click OK to confirm the upgrade, and start the process.
Caution: The firmware upgrade process begins once you click Update and then OK in the popup confirmation window. The upgrade process may take several minutes during which time the access point will be unavailable. Do not power down the access point while the upgrade is in process. When the upgrade is complete, the access point will restart and resume normal operation.
Verifying the Firmware Upgrade
To verify that the firmware upgrade completed successfully, check the firmware version shown on the Upgrade tab (and also on the Basic Settings tab). If the upgrade was successful, the updated version name or number will be indicated.