216

AT-TQ2403 - Management Software - User's Guide

 

 

ssid

Service Set IDentifier (a.k.a., Network Name)

supported-rates

Supported rates list

type

Type (AP, Ad hoc, or Other)

wpa

WPA security enabled

To get the neighboring access points, type get detected-ap.

AT-TQ2403# get detected-ap

 

 

mac

type

privacy ssid

channel

signal

-----------------------------------------------------------------------------------------------------------

00:0a:79:5b:fe:43

AP

On

ATTW-OFFICE

6

3

00:0a:79:94:ae:93

AP

Off

LANKom Electronics Co., Ltd.

6

7

00:01:02:03:03:10

AP

Off

allied

6

4

00:0a:79:98:0d:f7

AP

Off

GO

6

14

00:01:02:03:aa:10

AP

Off

developing

6

20

00:01:02:03:03:00

AP

Off

allied

36

12

Ethernet (Wired) Interface

Note: Before configuring this feature, make sure you are familiar with the names of the interfaces as described in “Understanding Interfaces as Presented in the CLI”. The interface name you reference in a command determines whether a setting applies to a wired or wireless interface, the Internal or Guest network, or (on a dual-radio AP) to radio "one" or radio "two".

This table shows a quick view of commands for getting and setting values for the Wired interface and links to detailed examples.

Feature or Setting

CLI Command

 

 

Get the DNS Name

get host id

 

 

Set the DNS Name

set host id HostName

 

For example:

 

set host id vicky-ap

 

 

Get Wired Internal Interface

See “Get Current Settings for the Ethernet (Wired) Management

Settings

Interface” under Status.

 

 

Get Wired Internal Guest

“Get Current Settings for the Ethernet (Wired) Guest Interface” under

Settings

Status.

 

 

Secure Management

Enable:

 

set management management-ip-enabled 1

 

 

Specify client to manage access

set management management-ip-addres MGMT_IP_Addr

point

For example:

 

 

set management management-ip-address 192.168.1.1