245 | |
|
|
This table shows a quick view of Radio Settings commands and links to detailed examples.
Feature or Setting | CLI Command |
|
|
Get Radio Settings | get radio |
| get radio wlan0 |
| get radio wlan0 detail |
|
|
Get IEEE 802.11 Radio Mode | get radio wlan0 mode |
|
|
Get Radio Channel | get radio wlan0 channel |
|
|
Get Basic Radio Settings | get radio wlan0 |
|
|
Get All Radio Settings | get radio wlan0 detail |
|
|
Get Supported Rate Set | get |
|
|
Get Basic Rate Set | get |
|
|
Configure Radio Settings | See detailed examples in: |
| “1. Turn the Radio On or Off” |
| “2. Set the Radio Mode” |
| “3. Enable or Disable Super AG” |
| “4. Set the Channel Policy” |
| “5. Set the Radio Channel” |
| “6. Configure Basic and Supported Rate Sets” |
| “7. Set the Beacon Interval” |
| “8. Set the DTIM Period” |
| “9. Set the Fragmentation Threshold” |
| “10. Set the RTS Threshold” |
|
|
Get IEEE 802.11 Radio Mode
To get the current setting for radio Mode:
(The radio in our example is using IEEE 802.11a mode.)