214

AT-TQ2403 - Management Software - User's Guide

 

 

AT-TQ2403# set log relay-host myserver

Specify the Relay Port

To specify the Relay Port for the syslog server:

set log relay-port Number_Of_LogRelayPort

Where Number_Of_LogRelayPort is the port number for the Log Relay Host.

For example:

AT-TQ2403# set log relay-port 514

Review Log Settings After Configuring Log Relay Host

To view the current log settings:

AT-TQ2403# get log

Property

Value

-----------------------------------

depth

128

persistence

no

severity

7

relay-enabled

1

relay-host

myserver

relay-port

514

From the above output for the "get log" command, you can identify the following about the Log Relay Host (syslog server):

∙The syslog server is enabled (because "relay-enabled" is set to "1")

∙The syslog server is at the IP address 10.10.5.220

∙The AP is listening for syslog messages on the default port 514

Get Transmit / Receive Statistics

AT-TQ2403# get

interface wlan1 ip mac ssid tx-packets tx-bytes tx-errors rx-packets

rx-bytes

rx-errors

Property

Value

------------------------------------

ip

0.0.0.0

mac

00:01:02:03:02:10

ssid

allied

tx-packets

191

tx-bytes

30336

tx-errors

0

rx-packets

188

rx-bytes

26818

rx-errors

0

Get Client Associations

AT-TQ2403# get association

 

 

interface station

authenticated associated

rx-packets