246AT-TQ2403 - Management Software - User's Guide
Get Radio Channel
To get the current setting for radio Channel:
AT-TQ2403# get radio wlan0 channel 36
(The radio in this example is on Channel 36.)
Get Basic Radio Settings
To get basic current Radio settings: | |
AT-TQ2403# get radio wlan0 | |
Property | Value | |
----------------------------------------------------- | |
status | up | |
mac | 00:01:02:03:02:00 | |
channel-policy | static | |
mode | a | |
static-channel | 36 | |
channel | 36 | |
tx-rx-status | up | |
Get All Radio Settings | |
To get all current Radio settings: get radio wlan0 detail | |
AT-TQ2403# get radio wlan0 detail | |
Property | | Value |
------------------------------------------------------------------------------------------ |
status | | up |
description | | Radio 1 - IEEE 802.11a |
mac | | 00:01:02:03:02:00 |
max-bss | | 16 |
channel-policy | | static |
mode | | a |
dot11h | | on |
radar-detection | | on |
block-time | | 30 |
quiet-duration | | 0 |
quiet-period | | 0 |
tx-mitigation | | 3 |
static-channel | | 36 |
channel | | 36 |
tx-power | | 100 |
tx-rx-status | | up |
beacon-interval | | 100 |
rts-threshold | | 2347 |
fragmentation-threshold | 2346 |
super-ag | | no |
atheros-xr | | no |
load-balance-disassociation-utilization | 0 |
load-balance-disassociation-stations | 0 |
load-balance-no-association-utilization | 0 |
ap-detection | | off |
station-isolation | | off |
frequency | | 5180 |
wme | | off |
