AT-TQ2403 Management Software User's Guide

129

 

 

 

 

 

 

 

 

 

 

 

 

Field

Description

 

 

 

Max. Burst Length

AP EDCA Parameter Only (The Max. Burst Length applies only to

 

 

 

 

traffic flowing from the access point to the client station.)

 

 

 

 

This value specifies (in milliseconds) the Maximum Burst Length

 

 

 

 

allowed for packet bursts on the wireless network. A packet burst is a

 

 

 

collection of multiple frames transmitted without header information.

 

 

 

The decreased overhead results in higher throughput and better

 

 

 

 

performance.

 

 

 

 

Valid values for maximum burst length are 0.0 through 999.9.

 

 

 

 

For more information, see “Packet Bursting for Better Performance”.

 

 

 

 

 

 

Enabling/Disabling Wi-Fi Multimedia

By default, Wi-Fi MultiMedia (WMM) is enabled on the access point. With WMM enabled, QoS prioritization and coordination of wireless medium access is on. With WMM enabled, QoS settings on the AT-TQ2403 Management Software control downstream traffic flowing from the access point to client station (AP EDCA parameters) and the upstream traffic flowing from the station to the access point (station EDCA parameters).

∙To disable WMM extensions, click Disabled.

∙To enable WMM extensions, click Enabled.

Configuring Station EDCA Parameters

Station Enhanced Distributed Channel Access (EDCA) Parameters affect traffic flowing from the client station to the access point.