User’s Guide
3.10 Paper Out Condition
When the printer runs out of paper, the following messages will appear in the display depending on paper path selected:
<Paper Out: Main>
<LOAD CHECKS>
or
<Paper Out: Alt>
<LOAD PROFILE 2>
1.Remove last printed form from paper path by using Form Feed key.
2.Load continuous forms. Refer to Page
3.Press the On/Off Line key to go back on line.
The alternating display indicates which path (Main, Alt) is empty and which form to reload.
NOTE
If the Profile has not been renamed to match the form being used, the display will indicate ‘Load Profile x’ as shown in the example above. In this case, the form associated with Profile 2 should be loaded. For more information on naming Profiles, see the ‘Rename’ feature located in the Profile Control menu described in Chapter 4.
Forms Handling
