User’s Guide
3.3Load Forms
NOTE
To load the main tractor path on Dual Path printer, place alternate path tractors in center position. Main tractor doors cannot be opened with alternate tractors aligned in front. (Hint: Use least frequently changed paper in main tractors and frequently changed paper or narrow stock in the alternate path.) If both paths are used, main tractor path must be loaded first.
NOTE
If paper is to be loaded into alternate path, align the left tractors with alignment mark on printer for both feed paths before loading front most forms.
NOTE
Form Thickness Adjustment Knob automatically retracts printhead to allow for forms loading and repositions to print position after loading.
To access the tractors and load a continuous form into either tractor, proceed as follows: (For cut sheet forms, go directly to Step 8.)
1.Unlock both tractors by rotating the locking levers.
2.Align the left tractor with the alignment mark located on the body of the printer. Lock left tractor in place. Place the right tractor at the approximate forms width.
Forms Handling