User’s Guide
Pressing this key switches the printer between on line and off line status. This key is used in conjunction with the LCD display. The On/Off Line key is also used to continue after clearing an error condition or to acknowledge tearing off a form on a paper path change.
Pressing this key will load paper into the main or alternate feed paths when paper is not already loaded.
When continuous forms are loaded, pressing this key advances the paper to the top of the next form.
When paper is loaded, pressing the Park/Path key ‘parks’ paper into the tractors.
When paper is not loaded and the printer is off line, pressing the Park/Path key changes the paper path and attempts to load paper (on dual path units). Either Main or Alternate paper path can be selected using this key.
The Path key is only valid if the Path feature is set to “Either”. Paper paths can also be selected by setting the path feature in a profile and selecting that profile. For additional instructions, see 3.8 – 3.13.
Pressing this key moves the form upward 1/144 inch for precise form alignment. When the key is pressed for more than ½ second, the paper advances continuously until the key is released.
