
User’s Guide
1.10 RS-232 and RS-422 Serial Interface Configuration
1.Set the power switch to On.
2.Open the Keypad Door. The first menu will appear on the display.
M1 PAGE FORMAT
3.Press the Next Menu key until you have accessed Menu 5
M5 SERIAL CNTRL
4.Press the Feature ▲ Key one time to select Baud Rate Feature.
5.Press the Value ▲ or Value ▼ to change baud rate to match host computer.
6.Press the Enter Key to save your selection.
7.Press the Feature ▼ key to select Serial
8.Press the Value ▲ ▼ keys to select the desired serial mode
9.Press the Enter key to save your selection.
10.Use the Feature ▼, Value ▲ ▼, and Enter keys to change any other required features in this menu.
∙Parity
∙Data Bits
∙DTR
∙HANDSHK
∙
∙
∙MODEM CTRL