AMT Datasouth 3300 manual User’s Guide

User’s Guide

9.Repeat Steps 5 through 8 as necessary until all features are correctly set for your application.

10.Close the Keypad Door to exit Setup Mode. The alternating display will read:

Press ‘Profile’

To Save Settings

To answer “Yes”, press the Profile key. This will permanently record the change in non-volatile memory for that profile.

To answer “No”, press any other key. This will make the change temporary, thus not changing the original profile setting. These settings will be valid until profiles are

changed again or the printer is powered off.

11.Press Load key to load paper (resets top-of-form).

12.Press the On/Off Line key to return to operation.

NOTE

To maintain correct top-of-form alignment when a profile change is made, the paper should be parked (if not already parked) and reloaded so that the printer can reset the top- of-form for the new profile.

Features and Profiles 4-9