User’s Guide
Menu 10: System Control
Displayed Function | Values | Description of Features |
|
|
|
|
|
|
Reset Quick List |
| Resets the list of features accessed by the Quick |
|
| Access key to the default features. |
|
|
|
Add Quick FTR |
| Use Value ▲ ▼ keys to select feature to add to Quick |
|
| Access key. Press Enter key. |
|
| This feature can now be accessed using Quick Access |
|
| key. Up to seven features can be available with the |
|
| Quick Access key. |
|
|
|
Delete Quick FTR |
| Use Value ▲ ▼ keys to select feature to delete to |
|
| Quick Access key. Press Enter key. |
|
| This feature will no longer be accessible from the |
|
| Quick Access key. |
|
|
|
Ribbon Life | 1- 50M | The value in this feature indicated the total number of |
|
| characters (in millions) that the RIBBON USED |
|
| feature uses to calculate the percent ribbon used. |
|
|
|
Replace Rib | 1 to 100 | This value indicates when the printer displays the |
|
| REPLACE RIBBON message. This feature |
|
| monitors the Ribbon Used feature and must be set |
|
| to a value greater that the CHECK RIB feature. |
|
|
|
Check Rib | 1 to 100 | This value indicated when the printer displays the |
|
| CHECK RIBBON message. This feature must be |
|
| set to a value less that the REPLACE RIB feature. |
|
| This feature monitors the Ribbon Used feature. |
|
|
|
Config | Tractor | Sets the mechanical configuration of the printer. |
| This is set to the correct value at the factory. | |
| Dual Trac | This feature is useful if the firmware or main |
|
| electronics controller board is replaced. |
| Trac Roll | The value is automatically saved. |
|
|
|
