User’s Guide
1.6Install the Power Cord
1.Set the power switch to Off. (See Figure
2.Install the power cord into the printer as shown in Figure
3.Verify that voltage setting is correct for the application
WARNING
CONNECTING THIS EQUIPMENT TO AN
UNGROUNDED POWER RECEPTACLE
CAN RESULT IN ELECTRICAL SHOCK.
4.Install the plug end of the power cord into a grounded AC outlet. The voltage of the AC power receptacle must match the voltage rating on the power cord receptacle label. A grounded outlet must be used. Plugging the printer into an ungrounded outlet may result in increased radio frequency noise generation, erratic printer operation, or electrical shock.
5.Set the power switch to ON. The alarm will sound 3 short tones and the printer will display:
Paper Out: Main
Keypad Configuration
