AMT Datasouth 3300 manual Printer Self Test, Open the Keypad Door

User’s Guide

1.8Printer Self Test

This test is used to verify printer operation. Before performing the printer self-test, refer to Section 3.3 Load Forms Page 3-3 for instructions on loading paper in the printer.

To start the test:

CAUTION

MARGINS ARE SET FOR 8.5” PAPER.

PRINTING OFF OF FORM WILL LEAD

TO PRINTER DAMAGE.

1.Load 8-1/2" forms.

2.Open the Keypad Door.

3.Press the Feature ▲ Key once. LCD will show "RUN SELF TEST".

4.Press the Enter Key. Printer self test will start (Figure 1-10). The display will alternate between the following:

<Diagnostics>

‘Enter’ To Stop

5.The self-test may be stopped by pressing the Enter key or by closing the Keypad Door.

1-20 Keypad Configuration