User’s Guide
3.13Selecting Paper Paths From the Host Computer Using DPCL Command
In demand document applications, the paper path may be selected by using Downline Printer Control Language (DPCL) sequences to select the active Profile
NOTE
In dual tractor units, the most frequently used form should be loaded in the main path and other forms in the alternate path. Now, changing profiles will prompt the operator to load the correct form in the alternate path. To ensure the correct form is loaded, the alternate path should be left empty when not in use. This will cause the printer to stop and indicate which form to load when the path is selected.
After the profile is configured, it may be selected for the host computer using DPCL sequences. The paper path will be selected according to the profile selection. Refer to previous Section 3.12 for further information on paper path selection using profiles.
Forms Handling