User’s Guide
5.3Printer Diagnostics
Printer Diagnostics
The following printer diagnostics are available to aid in troubleshooting printer malfunctions. They are accessed while in the Setup Mode under Menu 9: Diagnostics. To initiate these diagnostics, perform Steps
.
NOTE
Paper must be loaded prior to performing printer diagnostics.
1.Open the Keypad Door to access Setup Menu.
2.Press Next Menu key until the display appears as shown.
M9 DIAGNOSTICS
3.Press Feature ▼ key until display indicates name of diagnostic to be performed. For example:
Run Self Test
4.Press Enter key to start the selected test. LCD display alternate as follows:
Diagnostics
‘Enter’ To Stop
5. Press Enter key to stop, or close the Keypad Door.
