User’s Guide
3.12 Selecting Paper Paths Using the Profile Key
Each Profile contains a ‘Path’ feature which specifies the (Main, Alt, Either) paper path. When a profile is selected, the paper path may be automatically changed or the operator may be asked to load a new form in the currently selected paper path. The action taken depends on the value of the ‘Path’ feature setting (located in Menu 2 Forms Control).
After using the Profile key to select a new profile, the operator should either press the On/Off Line key or the Load key if paper is not loaded. The printer will then park the current form. If the current form cannot be parked, the printer will advance the form to the tear bar and display:
<Tear Off Form >
<Press On/Off Line >
After tearing off the current form and pressing On/Off Line, the printer will then park that form.
Example of profile names and paths: |
|
|
Original Profile Name | New Profile Name | Path |
Profile 1 | Checks | Main |
Profile 2 | Invoice | Alternate |
Profile 3 | Memos | Alternate |
Profile 4 | Reports | Alternate |
Forms Handling
