User’s Guide
As an example, assume the profile you are presently using defines the lines per inch as 6. To permanently change the lines per inch to 8, proceed as follows:
1.Press the On/Off Line key to take the printer off line.
2.Press Park key to park paper.
3.Open the Keypad Door to enter Setup Mode.
4.Press the Feature ▲ key to select Lines/Inch.
5.Press the Value ▼ key to change the Lines/Inch to 8 lines.
6.Press the Enter key to save the new Lines/Inch value.
7.Close the Keypad Door to exit Setup Mode. The LCD will read:
Press ‘Profile’
To Save Settings
Press Profile key to save entry.
8.Press the Load key to load paper (resets
9.Press the On/Off Line key to place the printer back on line.
After pressing the On/Off Line key, the printer will operate with the vertical motion defined as 8 lines per inch. The next time this profile is selected, or if the printer power is switched off and back on, the lines per inch margin will remain at 8 lines per inch.
